Switch Science Originals | 111 products
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 13.00 USD
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 14.00 USD
  • Multi voltage level converter with the Texas Instruments chip, TXS0108E, that performs bidirectional level shifting from any voltage to any voltage between 1.8V and 5V. It allows 8-bit bidirectional low-voltage conversion for a wide range such as 5V-3.3, V3.3V-1.8V, 5V-1.8V.

    Shipping Method: EMS Price: 8.00 USD
  • These are the stand-offs and screw sets for Raspberry Pi. You can secure the HAT with your Raspberry Pi.

    Shipping Method: EMS Price: 1.85 USD
  • BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

    Shipping Method: EMS Price: 15.00 USD
  • This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

    Shipping Method: EMS Price: 40.00 USD
  • microB USB Breakout SSCI-022477 (2247)

    microB USB Breakout

    Shipping Method: EMS Price: 2.00 USD
  • mbed Skill Badge SSCI-022057 (2205)

    You know we all love mbed. So here it is! The mbed Skill Badge for you. This iron-on patch with mbed logo is our very first original skill badge.

    Shipping Method: EMS Price: 5.00 USD
  • Amp board kit for Super directional ultrasonic speaker which delivers sound only straight ahead by ultrasound.

    Shipping Method: EMS Price: 100.00 USD
  • Eaglet is a tiny breakout board for Intel Edison.

    Shipping Method: EMS Price: 35.00 USD This item is retired.
  • T-Cobbler breakout kit for Raspberry Pi B+

    Shipping Method: EMS Price: 7.80 USD
  • Switch Science mbed LPC824 SSCI-020251 (2025)

    The Switch Science mbed LPC824 enables you to use NXP LPC824 (ARM Cortex-M0+) with the mbed online compiler.

    Shipping Method: EMS Price: 24.00 USD
  • Breakout board for 16x2 character I2C LCD module (horizontal type)

    Shipping Method: EMS Price: 16.00 USD
  • Protoboard for Raspberry Pi

    Shipping Method: EMS Price: 6.08 USD
  • TsuboLink-II HRM1017 SSCI-018296 (1829)

    TsuboLink-II for HRM1017 is a CMSIS-DAP debug adaptor used for programming and debugging the HRM1017 breakout.

    Shipping Method: EMS Price: 22.50 USD
  • Using ultrasound, the speaker kit sharply directs and sends audio only straight. It has many wave transmitters. Please note that you need to solder many points for assembling it.

    Shipping Method: EMS Price: 200.00 USD
  • HRM1017 Breakout SSCI-018142 (1814)

    Breakout board for the Hoshiden HRM1017, small Bluetooth Low Energy (BLE) module

    Shipping Method: EMS Price: 20.00 USD This item is retired.
  • LM75B temperature sensor (I2C interface)

    Shipping Method: EMS Price: 3.50 USD
  • The Switch Science mbed LPC1114FN28 enables you to use NXP LPC1114FN28 (ARM Cortex-M0 MCU in DIP28 package) with the mbed online compiler easily. It is bundled with an LPC1114FN28.

    Shipping Method: EMS Price: 20.00 USD
  • 16-port I/O expander for Raspberry Pi. MCP23017 by Microchip is mounted on the expander.

    Shipping Method: EMS Price: 9.00 USD