It is a connection board to connect JDI reflective memory in pixel (MIP) LCD to FRDM-K64F. Since it supports multiple types of LCD and is assembled with an oscillation circuit etc., by simply connecting it,it is possible to evaluate JDI reflective MIP LCD.

Ultra-low power consumption color reflective LCD module from JDI (Japan Display Inc.). Introduction of proprietary reflective color technology made it possible for you to enjoy clear visibility even under the direct sunlight. Communication method and size are SPI and 1.28 model respectively.

BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

1×40 Extra-long male header

2x20 Female header

Breakout board for 16x2 character I2C LCD module (horizontal type)

LM75B temperature sensor (I2C interface)

2x13 Tall Female header with extra long legs (for Raspberry Pi)

This is L-shaped Pin Socket, and can be fit to a GPIO of Raspberry Pi.

2×18 female header with long legs

You can connect this I2C controlled 8×2 LCD Breakout to GPIO of Raspberry Pi directly and use it without soldering!

Stackable Header - 6 Pin

Stackable Header - 8 Pin

Stackable Header - 10 Pin

Breadboard friendly, 2.54mm pitch, I2C controlled 8x2 characters LCD board for 5V microcontroller. It has the pull-up resistors for I2C bus.

Breadboard friendly, 2.54mm pitch, I2C controlled 8x2 characters LCD board for 3.3V microcontroller. It has the pull-up resistors for I2C bus in it.

Omron D6T-44L-06 is a contactless thermal sensor based on the MEMS technology.

5V to 3.3 V, this is a converter board for breadboard with step-down voltage regulator.

A cute soldering kit for beginners!

A cute soldering kit for beginners!