Mount this carrier board directly to Rapiro, and you can wirelessly control your Rapiro using XBee.

The breakout board for the chip SC16IS750 converts I2C or SPI serial signals to UART. It is handy for expanding a serial port when using microcontrollers.

Soldering iron thermometer shield for Arduino

The Switch Science mbed LPC824 enables you to use NXP LPC824 (ARM Cortex-M0+) with the mbed online compiler.

This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

Intel® Edison Breakout Board

The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

Breakout board for 16x2 character I2C LCD module (horizontal type)

Simplifying the task of interfacing an XBee with your Arduino

It is a connection board to connect JDI reflective memory in pixel (MIP) LCD to FRDM-K64F. Since it supports multiple types of LCD and is assembled with an oscillation circuit etc., by simply connecting it,it is possible to evaluate JDI reflective MIP LCD.

An ESPr Developer semi finished kit with ultra low power consumption color LCD from JDI (Japan Display Inc). The components are fully soldered, so just fix the display to get started!

128x48 Graphic Display - AQM1248A

BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors.

PCF2129AT real time clock with SPI/I2C bus interface breakout board

PCA9629APW stepping motor driver breakout board

PCA9517ADP I2C voltage level converter breakout board

This product is only a pcb of ESP-WROOM-02 Breakout Pro.

NTB0104 bidirectional level shifter breakout board

PCAL9555APW I2C GPIO Expander