New Products | 51 products
  • NinjaScan-Light Module SSCI-025508 (2550)

    An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors. This is NOT kit version.

    Shipping Method: EMS Price: 150.00 USD This item is retired.
  • Introduced by NADA ELECTRONICS, AS-289R2 Thermal Printer Shield is the most advanced two-inch (58 mm) thermal printer in the industry.

    Shipping Method: EMS Price: 161.00 USD
  • BLE module on Switch Science mbed TY51822r3 is Taiyo Yuden EYSGCNZWY. EYSGCNZWY is FCC, IC, and TELEC approved.

    Shipping Method: EMS Price: 38.00 USD out of stock
  • A board which allows you to touch your smartphone without using your hands.

    Shipping Method: EMS Price: 6.00 USD
  • NinjaScan-Light Kit SSCI-023641 (2364)

    An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors.

    Shipping Method: EMS Price: 190.00 USD out of stock
  • This product is only a pcb of ESP-WROOM-02 Breakout Pro.

    Shipping Method: EMS Price: 1.50 USD
  • Mount this carrier board directly to Rapiro, and you can wirelessly control your Rapiro using XBee.

    Shipping Method: EMS Price: 18.50 USD
  • Intel® Edison Breakout Board

    Shipping Method: EMS Price: 16.00 USD
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 13.00 USD
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 14.00 USD
  • Multi voltage level converter with the Texas Instruments chip, TXS0108E, that performs bidirectional level shifting from any voltage to any voltage between 1.8V and 5V. It allows 8-bit bidirectional low-voltage conversion for a wide range such as 5V-3.3, V3.3V-1.8V, 5V-1.8V.

    Shipping Method: EMS Price: 8.00 USD
  • The breakout board for the chip SC16IS750 converts I2C or SPI serial signals to UART. It is handy for expanding a serial port when using microcontrollers.

    Shipping Method: EMS Price: 15.00 USD
  • These are the stand-offs and screw sets for Raspberry Pi. You can secure the HAT with your Raspberry Pi.

    Shipping Method: EMS Price: 1.85 USD
  • BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

    Shipping Method: EMS Price: 15.00 USD
  • This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

    Shipping Method: EMS Price: 40.00 USD
  • Amp board kit for Super directional ultrasonic speaker which delivers sound only straight ahead by ultrasound.

    Shipping Method: EMS Price: 100.00 USD
  • Switch Science mbed LPC824 SSCI-020251 (2025)

    The Switch Science mbed LPC824 enables you to use NXP LPC824 (ARM Cortex-M0+) with the mbed online compiler.

    Shipping Method: EMS Price: 24.00 USD
  • Using ultrasound, the speaker kit sharply directs and sends audio only straight. It has many wave transmitters. Please note that you need to solder many points for assembling it.

    Shipping Method: EMS Price: 200.00 USD
  • LM75B temperature sensor (I2C interface)

    Shipping Method: EMS Price: 3.50 USD
  • This is a T-cobbler breakout board kit designed for extending the GPIO, Serial, SPI and I2C interface on Raspberry Pi A/B to breadboard.

    Shipping Method: EMS Price: 7.25 USD This item is retired.