Mount this carrier board directly to Rapiro, and you can wirelessly control your Rapiro using XBee.

This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

Rapiro is a cute, affordable, easy to assemble, humanoid robot kit. Comes with 12 servos and servo control board (Arduino compatible). Designed to work with Raspberry Pi and its camera module. Small body with dynamic actions. You'll get unlimited possibilities with Rapiro by putting your ideas into programming.

This product is on sale now.

Raspberry Pi 2 Model B Mounting plate for Rapiro

Rapiro LED Board equipped with LED to color the eyes of Rapiro.

Battery box set including the following parts for the back of Rapiro.

This is a small servo motor for Rapiro's two arms.

This is a large servo motor for Rapiro's neck, waist and two feet.

Rapiro 6 Pole Cable for serial UART and Raspberry Pi.

Rapiro 5pole Cable. This cable is a part of Rapiro for connection between Servo Motor Controller Board to LED Board.

Small servo arm (X type).

Rapiro Servo Motor Sticker

Big Head Screws for Rapiro 3mm (Silver) 2pcs
Diameter: M3

Flat Head Screws for Rapiro M3（Silver）2pcs.
Diameter: M3

Tapping Screws for Rapiro 2-5mm (Silver) 4pcs.
Diameter: M2

Tapping Screws for Rapiro 2-7mm (Black) 18pcs
Diameter M2/Length 7mm

Tapping Screws for Rapiro 3-6mm (Silver) 24pcs.
Diameter M3/Length 6mm.

Arduino-compatible board that comes with Arduino UNO bootloader installed on the microcontroller. This means it can be controlled by Arduino IDE.

GP2Y0A21YK is a famous infrared proximity sensor made by Sharp. This product includes a cable for the sensor.