- New Products ( 51 )
- Switch Science Originals ( 111 )
- Consignment Products ( 15 )
- Rapiro ( 19 )
- Raspberry Pi ( 14 )
- Arduino ( 17 )
- ESP Boards ( 9 )
- mbed ( 12 )
- SPRESENSE ( 0 )
- XBee ( 5 )
- Conta ( 0 )
- NFC ( 9 )
- BLE ( 3 )
- Parts ( 42 )
- Intel Edison ( 3 )
- Others ( 17 )
Breakout board for the Hoshiden HRM1017, small BLE module.
Power supply voltage is from 1.8 V to 3.6 V (typ 3.0 V). The pattern on the backside can be short-circuited to supply power from micro-USB. 3.3V will be provided to HRM 1017 in this case. Micro-B is only for power supply. the signal line is open. If you want to connect a battery via pin header to use this module, remove the solder of the backside pattern. You can program HRM1017 by using 1.27mm pitch pin header on the board.
Switch Science mbed HRM1017 SSCI-017558 (1755)
The Switch Science mbed HRM1017 is FCC and Japan radio type approved Bluetooth low energy development board with the Nordic nRF51822 SoC. This board is also compatible with nRF51822-mKIT except the 32.768kHz crystal availability.Shipping Method: EMS Price: 35.00 USD This item is retired.
TsuboLink-II HRM1017 SSCI-018296 (1829)
TsuboLink-II for HRM1017 is a CMSIS-DAP debug adaptor used for programming and debugging the HRM1017 breakout.Shipping Method: EMS Price: 22.50 USD
HRM1017 Evaluation Kit HOSIDEN-HRM1017-DEVKIT (1808)
HRM1017 Evaluation KitShipping Method: EMS Price: 156.00 USD