Category
ProjectBox S for eVY1 Shield

Enclosure for eVY1 shield w/o header by Emerge+.

This item comes as a kit. *The assembly procedure manual is provided only in Japanese. It takes about 30 minutes for assembly. As the 1-mm-thin acrylic part is fragile, please be careful not to break it when removing the protective sheet. The protective sheet can be removed rinsing with water.

USB and headphone jack

Top plate is removable

Slip in the board between the acrylic parts.

Notes

  • This item is delivered as kit. You will need to assemble it yourself.
  • For eVY1 shield without header
  • Remove the protective sheet prior to use. The sheet might be already peeled off partially, but there is no problem caused by that.
  • Do not try to bend the acrylic parts. They might break causing injuries.
  • Do not tighten the screws too much. It might cause the acrylic parts to crack.

Category

ProjectBox S for eVY1 Shield
Name ProjectBox S for eVY1 Shield
Code EMERGEPLUS-PBS4EVY1-CL
SKU# 1605
  • eVY1 Shield w/o header
    eVY1 Shield w/o header AIDES-002 (1489)

    eVY1 Shield adds eVocaloid system to your Arduino. You can make use of an integrated version of the VOCALOID, Yamaha singing voice synthesizer, module in NSX Series. This version is not soldered.