Category
LCD Shield Kit - White on Blue

LCD Shield Kit adds a 16x2 Character LCD to your Arduino. You can use it with Prototyping Lab Kit Vol.1 and/or Prototyping Lab Kit Vol.2.

Includes:

  • 1 x PCB
  • 1 x Pin socket set for shield (2 x 1x6pin, 2 x 1x8pin)
  • 1 x 16x2 Character LCD - White on Blue
  • 1 x 1x16 pin break away header (The included header and socket may be 1x20. Please cut off them to 1x16 if so.)
  • 1 x 1x16 pin socket (The included header and socket may be 1x20. Please cut off them to 1x16 if so.)
  • 1 x LED
  • 1 x 100Ω Resistor
  • 1 x 1kΩ Resistor
  • 1 x 1kΩ Adjustable resistor
  • 1 x 10kΩ Adjustable resistor
  • 1 x Push button switch

Tutorial (Japanese)
You can assemble the kit in about 15-30 minutes.

Example:

The assembled kit works as in this picture. You can adjust contrast and brightness by the adjustable resistors.

LCD Shield Kit - White on Blue
Name LCD Shield Kit - White on Blue
Code SSCI-KIT-LCDSHIELDBL
SKU# 538
  • LCD Shield Kit - Black on Green
    LCD Shield Kit - Black on Green SSCI-KIT-LCDSHIELDGR (724)

    LCD Shield Kit adds a 16x2 Character LCD to your Arduino. The kit comes with a black on green LCD.

  • Arduino Uno R3
    Arduino Uno R3 ARDUINO-A000066 (789)

    The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MH ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.