Switch Science Originals | 108 products
  • This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

    Shipping Method: EMS Price: 40.00 USD
  • You can connect this I2C controlled 8×2 LCD Breakout to GPIO of Raspberry Pi directly and use it without soldering!

    Shipping Method: EMS Price: 8.64 USD out of stock
  • Universal board for Arduino.

    Shipping Method: EMS Price: 5.72 USD
  • Wire Harness for JST 2-Pin ZH-PH

    Shipping Method: EMS Price: 3.00 USD
  • Zigzag Universal PCB SSCI-025614 (2561)

    Zigzag Universal PCB

    Shipping Method: EMS Price: 1.73 USD
  • Breakout for MESH GPIO Tag Single

    Shipping Method: EMS Price: 2.60 USD
  • Breakout for MESH GPIO Tag Dual

    Shipping Method: EMS Price: 2.60 USD
  • USB Type A Female Breakout Horizontal

    Shipping Method: EMS Price: 3.86 USD
  • 7segduino Kit - Green SSCI-KIT-7SDG (743)

    7segduino Kit - Green

    Shipping Method: EMS Price: 14.07 USD Not Selling (Yet)
  • 7segduino Kit - Yellow SSCI-KIT-7SDY (744)

    7segduino Kit - Yellow

    Shipping Method: EMS Price: 14.07 USD
  • 7segduino Kit - White SSCI-KIT-7SDW (745)

    7segduino Kit - White

    Shipping Method: EMS Price: 14.90 USD
  • Vanilla shield for XBee SSCI-015707 (1570)

    Vanilla shield for XBee

    Shipping Method: EMS Price: 4.00 USD
  • 7segduino Kit - Red SSCI-KIT-7SDR (741)

    7segduino Kit - Red

    Shipping Method: EMS Price: 14.07 USD
  • 7segduino Kit - Blue SSCI-KIT-7SDB (742)

    7segduino Kit - Blue

    Shipping Method: EMS Price: 14.07 USD out of stock
  • NinjaScan-Light Kit SSCI-023641 (2364)

    An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors.

    Shipping Method: EMS Price: 190.00 USD out of stock
  • NinjaScan-Light Module SSCI-025508 (2550)

    An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors. This is NOT kit version.

    Shipping Method: EMS Price: 150.00 USD out of stock
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 14.00 USD
  • This is a T-cobbler breakout board kit designed for extending the GPIO, Serial, SPI and I2C interface on Raspberry Pi A/B to breadboard.

    Shipping Method: EMS Price: 7.25 USD out of stock
  • The IC with the built-in countdown timer monitors GPIO of Raspberry Pi, and the software on Raspberry Pi sends pulse signals to GPIO at a fixed interval to re-set the timer in the IC.

    Shipping Method: EMS Price: 13.00 USD
  • BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

    Shipping Method: EMS Price: 15.00 USD