New Products | 47 products
  • A module to control "ON/OFF" on USB using MESH GPIO tag.

    Shipping Method: EMS Price: 10.00 USD
  • The Breakout Board has a digital MEMS MIC SPH0641LU4H-1 made by Knowles. The MEMS MIC is able to apply for ultrasonic sensors and ultrasonic communications. The pin pitch is 2.54 mm, 0.1 inch. The MEMS MIC enables to receive wide range sound from audible frequency to ultrasonic (100 Hz-80 kHz).

    Shipping Method: EMS Price: 13.89 USD
  • Introduced by NADA ELECTRONICS, AS-289R2 Thermal Printer Shield is the most advanced two-inch (58 mm) thermal printer in the industry.

    Shipping Method: EMS Price: 161.00 USD
  • FCC and Japan radio type approved Bluetooth low energy development board with Nordic nRF51822 SoC. This board is for developing with mbed online compiler.

    Shipping Method: EMS Price: 35.00 USD
  • Programmer / debugger for MCU of Cypress "PSoC3", "PSoC4" and "PSoC5LP".

    Shipping Method: EMS Price: 55.55 USD
  • TouchMIDI KIGAKUDOH-001 (2726)

    TouchMIDI is a board outputs MIDI via USB when capacitance touch sensors are touched. Firmware is already written to this board, so you can utilize it for making your original MIDI controller project only soldering electrodes.

    Shipping Method: EMS Price: 32.40 USD out of stock
  • Switch Science mbed LPC824 SSCI-020251 (2025)

    The Switch Science mbed LPC824 enables you to use NXP LPC824 (ARM Cortex-M0+) with the mbed online compiler.

    Shipping Method: EMS Price: 24.00 USD
  • This product is only a pcb of ESP-WROOM-02 Breakout Pro.

    Shipping Method: EMS Price: 1.50 USD
  • Intel® Edison Breakout Board

    Shipping Method: EMS Price: 16.00 USD
  • LM75B temperature sensor (I2C interface)

    Shipping Method: EMS Price: 3.50 USD
  • These are the stand-offs and screw sets for Raspberry Pi. You can secure the HAT with your Raspberry Pi.

    Shipping Method: EMS Price: 1.85 USD
  • This ROHM BD6211F-mounted Motor Driver Breakout is a simple, easy-to-handle, and ultra-small H-bridge motor driver for DC brush motor applications. Pulse width modulated(PWM) signal and Power MOSFET can lower energy consumption.

    Shipping Method: EMS Price: 6.00 USD
  • Raspberry Pi 2 Model B Mounting plate for Rapiro

    Shipping Method: EMS Price: 2.50 USD
  • nekoboard2 SSCI-027007 (2700)

    The nekoboard2 is a sensor board that can be combined with Scratch, a free educational programming language for children. This is compatible with both 1.4 and 2.0, the current major version of Scratch programming.

    Shipping Method: EMS Price: 28.00 USD
  • Mount this carrier board directly to Rapiro, and you can wirelessly control your Rapiro using XBee.

    Shipping Method: EMS Price: 18.50 USD
  • BLE module on Switch Science mbed TY51822r3 is Taiyo Yuden EYSGCNZWY. EYSGCNZWY is FCC, IC, and TELEC approved.

    Shipping Method: EMS Price: 38.00 USD
  • A board which allows you to touch your smartphone without using your hands.

    Shipping Method: EMS Price: 6.00 USD
  • 5V to 3.3 V, this is a converter board for breadboard with step-down voltage regulator.

    Shipping Method: EMS Price: 4.00 USD out of stock
  • This carrier board let you use Intel Edison for controlling Rapiro. GPIO input voltage level is converted from Edison’s 1.8 V to 3.3 V.

    Shipping Method: EMS Price: 40.00 USD
  • NinjaScan-Light Kit SSCI-023641 (2364)

    An ultra small GPS logger which is equipped with GPS, barometer, and 9-axis motion sensors.

    Shipping Method: EMS Price: 190.00 USD out of stock