uCXpresso LilyPad for nano51822 is a BT4.0/4.1 (Bluetooth low energy or BLE) module designed based on Nordic nRF581822 solution The SoM chip is soldered on the lilypad breakout board.

Features:

• Dual Transmission Mode of BLE & RF 2.4G upon customer preference
• Low power requirements, ultra-low peak, average and idle mode power consumption
• Compatible with a large installed based of Phones , tablets and computers
• Fully coverage of wireless applications
• Diameter 39.37mm (15.50") x 1.0mm
• IOx24 ( VCC, GND, GPIOx22, ADx6, SPIx1, I2Cx1, UARTx1, PWMx6)
• uCXpresso.NRF RTOS/BLE C/C++ Framework
• Tickless Technology Supported.(under the global average 26uA)
• LPCXpresso IDE Ready (for Windows, Linux, Mac OS/X)
• No usb needed, DFU OTA (Over the Air) update F/W
• (nRF DFU for Android)
• Maximum output +4dBm, and communication distance up to 80M in field area
• high standard 32.768MHz XTAL
• The DFU Button can easily switch between DFU mode and Application Mode
• CR2032 button battery socket at the back of the board
• The throuhole can easily use with (M2) screws
• Built in voltage and temperature detection
• Beacon Demo program out of factory

nano51822 Specs:

• TX Power -20 to +4dbm
• ARM Cortex-M0 32 bit processor
• Serial Wire Debug (SWD)
• RTOS 8.1.x and Tickless Technology ready
• 152kb embedded flash memory 6kb RAM memory
• User's RAM size: 6 KB
• Supply voltage range 1.8V to 3.6V
• 2.5us wake-up using 16MHz RCOSC
• 8/9/10 bit ADC
• 6 configurable PWM channels
• 30 General Purpose I/O Pins
• Two-wire Master (I2C compatible)
• UART (CTS/RTS)
• 2.4GHZ transceiver
• -93dbm sensitivity in Bluetooth low energy mode
• uCXpresso
• uCXpresso knowredge base
  

Category

• BLE